Safety Data Sheet
1. Product Identification
- Product Name: Aluminum Sulfate
- Manufacturer: Société Tunisiennes des Produits Alumineux, STPA
- CAS Number: 10043-01-3
2. Hazard Identification
2.1 Classification du Produit
Classification carried out in accordance with Regulation (EC) No 1272/2008
- Skin irritation, H314
- Severe eye irritation, H318
- Corrosive to metals, H290
2.2 Labeling Elements
Labeling according to Regulation (EC) No 1272/2008
Hazard Symbols :
Warning Phrases: Danger
Hazard Statements:
H318 + H314
Causes severe skin burns and eye damage.
H290
May be corrosive to metals.
Precautionary Statements :
P280
Wear protective gloves/eye protection/face protection.
P305 + P351 + P338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if the victim wears them and if they can be easily removed. Continue rinsing.
P310
Call a POISON CENTER/doctor immediately.
3. Composition
- Substance: Aluminum Sulfate
- CAS Number: 10043-01-3
- Molecular Formula: Al2(SO4)3 n H2O
4. First Aid
General Advice :
Remove any contaminated clothing immediately. The rescuer should protect themselves.
In case of inhalation :
Move the person to fresh air. If symptoms persist, consult a doctor.
In case of skin contact :
Wash immediately and thoroughly with water for at least 15 minutes. If skin irritation persists, consult a doctor.
In case of eye contact :
Rinse thoroughly with plenty of water, including under the eyelids. Call a doctor immediately.
In case of ingestion :
Rinse the mouth with water. Induce vomiting only if the victim is fully conscious. Call a doctor immediately.
5. Firefighting measures
Flammability class :
Non-combustible.
Suitable extinguishing media :
Use appropriate media to fight surrounding fires.
Special procedures :
Remove unnecessary personnel.
Special protective measures :
Wear appropriate protective clothing.
Use an autonomous respiratory device.
6. Measures to take in case of accidental release
Individual precautions :
Avoid creating dust.
Environmental precautions:
Avoid release into the environment.
Measures after spillage/release
Contain and collect as any solid.
Avoid penetration into sewers, soil, and drinking water.
7. Handling and Storage
Precautions when handling and storing :
Take appropriate precautions to avoid dust generation.
Product to be handled following good industrial hygiene and safety procedures.
Technical protective measures :
No special recommendations.
Storage :
Aluminum sulfate can be stored for consumption (for more than 7 years) if kept in a dry place.
8. Exposure control / Personal protection
Respiratory protection :
Wear a dust or mist respirator if the handling of the product generates airborne particles.
Hand protection:
Wear gloves.
Eye protection :
Wear safety glasses with side protection to prevent injury from flying particles and/or any contact with the product in the eyes.
Skin protection :
If contact with the skin or contamination of clothing is possible, wear protective clothing.
Ingestion – Industrial hygiene :
Do not eat, drink, or smoke during use.
9. Physical and chemical properties
Physical state: Powder, granules
Color: White.
Odor: Odorless
Solubility in water [g/100 ml]: 30
Melting point: 92°C
10. STABILITY AND RESPONSIVENESS
Stability :
Stable under normal conditions.
Conditions to avoid:
None under normal conditions.
Hazardous properties. :
None under normal conditions.
11. TOXICOLOGICAL INFORMATION.
Effects of skin contact. :
May irritate the eyes and skin.
Effects of eye contact
Irritating to the eyes.
Ingestion :
Irritation of the mucous membranes, mouth, throat, and esophagus.
Other toxicological information
This product is not considered hazardous.
12. ECOLOGICAL INFORMATION
Ecotoxicity effect :
Regarding aluminum compounds in general: toxic to aquatic organisms. Poisons: toxic at concentrations above 0.55 mg/L.
WGK Class :
Water pollution class 1: slightly polluting.
Comply with national and/or regional laws regarding waste disposal.
13. CONSIDERATIONS REGARDING ELIMINATION
Waste Disposal Considerations :
Destroy in accordance with applicable local/national safety regulations.
Treatment of Contaminated Packaging :
After the last use, the packaging will be completely emptied and sealed.
14. Information Regarding Transport:
General Information :
Non-regulated
Treatment of Contaminated Packaging :
After the last use, the packaging will be completely emptied and sealed.
15. Regulatory Information:
Labeling :
Classification and labeling according to the guidelines for eye-irritating products. In case of eye contact, rinse immediately and thoroughly with water and seek medical advice.
Contains :
Aluminum sulfate.
16. Other Information :
Disclaimer :
The information contained in this sheet is sourced from reputable sources. However, it is provided without any express or implied warranty of its accuracy. The conditions or methods of handling, storage, use, or disposal of the product are beyond our control and may not fall within our expertise. For these reasons, among others, we disclaim any responsibility for loss, damage, or costs arising from or related in any way to the handling, storage, use, or disposal of the product. This SDS has been prepared and should be used exclusively for this product. If the product is used as a component of another product, the information provided may not apply.
Société Tunisienne des Produits Alumineux
STPA is a recognized expert in the manufacturing of Aluminum Sulfate, providing quality solutions for water treatment and various industries since 1972.
Navigate
Who Are We?
Our Certifications
Solid Aluminum Sulfate
Liquid Aluminum Sulfate
Contact
Contact Us
Phone: 71 449 447 – 71 449 387
Fax: 71 449 036
Email: direction@stpatunisie.tn
Address: Zone Industrielle, Route du Bac, 2040, Rades, Tunisie
Our Location
©2024 STPA – All rights reserved – STPA Development Department

