Safety Data Sheet

1. Product Identification

  • Product Name: Aluminum Sulfate
  • Manufacturer:  Société Tunisiennes des Produits Alumineux, STPA
  • CAS Number:  10043-01-3

2. Hazard Identification

2.1 Classification du Produit

Classification carried out in accordance with Regulation (EC) No 1272/2008

  • Skin irritation, H314
  • Severe eye irritation, H318
  • Corrosive to metals, H290

2.2 Labeling Elements

Labeling according to Regulation (EC) No 1272/2008

Hazard Symbols :

Warning Phrases: Danger

Hazard Statements:

H318 + H314

Causes severe skin burns and eye damage.

H290

May be corrosive to metals.

Precautionary Statements : 

P280

Wear protective gloves/eye protection/face protection.

P305  +  P351  +  P338

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if the victim wears them and if they can be easily removed. Continue rinsing.

P310

Call a POISON CENTER/doctor immediately.

3. Composition

  • Substance:  Aluminum Sulfate
  • CAS Number:  10043-01-3
  • Molecular Formula: Al2(SO4)3 n H2O

4. First Aid

General Advice : 

Remove any contaminated clothing immediately. The rescuer should protect themselves.

In case of inhalation : 

Move the person to fresh air. If symptoms persist, consult a doctor.

In case of skin contact : 

Wash immediately and thoroughly with water for at least 15 minutes. If skin irritation persists, consult a doctor.

In case of eye contact : 

Rinse thoroughly with plenty of water, including under the eyelids. Call a doctor immediately.

In case of ingestion : 

Rinse the mouth with water. Induce vomiting only if the victim is fully conscious. Call a doctor immediately.

5. Firefighting measures

Flammability class : 

Non-combustible.

Suitable extinguishing media : 

Use appropriate media to fight surrounding fires.

Special procedures : 

Remove unnecessary personnel.

Special protective measures : 

Wear appropriate protective clothing.

Use an autonomous respiratory device.

6. Measures to take in case of accidental release

Individual precautions : 

Avoid creating dust.

Environmental precautions: 

Avoid release into the environment.

Measures after spillage/release

Contain and collect as any solid.

Avoid penetration into sewers, soil, and drinking water.

7. Handling and Storage

Precautions when handling and storing : 

Take appropriate precautions to avoid dust generation.

Product to be handled following good industrial hygiene and safety procedures.

Technical protective measures : 

No special recommendations.

Storage : 

Aluminum sulfate can be stored for consumption (for more than 7 years) if kept in a dry place.

8. Exposure control / Personal protection

Respiratory protection : 

Wear a dust or mist respirator if the handling of the product generates airborne particles.

Hand protection: 

Wear gloves.

Eye protection : 

Wear safety glasses with side protection to prevent injury from flying particles and/or any contact with the product in the eyes.

Skin protection : 

If contact with the skin or contamination of clothing is possible, wear protective clothing.

Ingestion – Industrial hygiene :

Do not eat, drink, or smoke during use.

9. Physical and chemical properties

Physical state: Powder, granules

Color: White.

Odor: Odorless

Solubility in water [g/100 ml]: 30

Melting point: 92°C

10. STABILITY AND RESPONSIVENESS

Stability : 

Stable under normal conditions.

Conditions to avoid

None under normal conditions.

Hazardous properties.

None under normal conditions.

11. TOXICOLOGICAL INFORMATION.

Effects of skin contact.

May irritate the eyes and skin.

Effects of eye contact

Irritating to the eyes.

Ingestion : 

Irritation of the mucous membranes, mouth, throat, and esophagus.

Other toxicological information

This product is not considered hazardous.

12. ECOLOGICAL INFORMATION

Ecotoxicity effect

Regarding aluminum compounds in general: toxic to aquatic organisms. Poisons: toxic at concentrations above 0.55 mg/L.

WGK Class

Water pollution class 1: slightly polluting.

Comply with national and/or regional laws regarding waste disposal.

13. CONSIDERATIONS REGARDING ELIMINATION

Waste Disposal Considerations : 

Destroy in accordance with applicable local/national safety regulations.

Treatment of Contaminated Packaging : 

After the last use, the packaging will be completely emptied and sealed.

14. Information Regarding Transport:

General Information : 

Non-regulated

Treatment of Contaminated Packaging : 

After the last use, the packaging will be completely emptied and sealed.

15. Regulatory Information:

Labeling : 

Classification and labeling according to the guidelines for eye-irritating products. In case of eye contact, rinse immediately and thoroughly with water and seek medical advice.

Contains : 

Aluminum sulfate.

16. Other Information :

Disclaimer : 

The information contained in this sheet is sourced from reputable sources. However, it is provided without any express or implied warranty of its accuracy. The conditions or methods of handling, storage, use, or disposal of the product are beyond our control and may not fall within our expertise. For these reasons, among others, we disclaim any responsibility for loss, damage, or costs arising from or related in any way to the handling, storage, use, or disposal of the product. This SDS has been prepared and should be used exclusively for this product. If the product is used as a component of another product, the information provided may not apply.

Société Tunisienne des Produits Alumineux

STPA is a recognized expert in the manufacturing of Aluminum Sulfate, providing quality solutions for water treatment and various industries since 1972.

Navigate

Who Are We?

Our Certifications

Solid Aluminum Sulfate

Liquid Aluminum Sulfate

Contact

Contact Us

Phone: 71 449 447 – 71 449 387

Fax: 71 449 036

Email: direction@stpatunisie.tn

Address: Zone Industrielle, Route du Bac, 2040, Rades, Tunisie

Our Location

©2024 STPA – All rights reserved – STPA Development Department